Hello all!
This post is a response to a question from a student of my recent CVOICE course. The question was as follows - how to drop a hardware Conference in CUCME when initiator of the Conference is leaving the session.
The solution is easy. In ephone or ephone-template configuration just add a command conference drop-mode. Its syntax is:
conference drop-mode [creator | local]
Parameter creator means Conference is stopped when initiator leaves it. Parameter local says Conference is stopped when the last internal CUCME's phone disconnects from the session (ie prevents a situation where the conference are used by external subscribers only).
An example of configuration is here:
HQ-1(config)# ephone 1
HQ-1(config-ephone)# conference drop-mode creator
Wish all of you a nice day!
This post is a response to a question from a student of my recent CVOICE course. The question was as follows - how to drop a hardware Conference in CUCME when initiator of the Conference is leaving the session.
The solution is easy. In ephone or ephone-template configuration just add a command conference drop-mode. Its syntax is:
conference drop-mode [creator | local]
Parameter creator means Conference is stopped when initiator leaves it. Parameter local says Conference is stopped when the last internal CUCME's phone disconnects from the session (ie prevents a situation where the conference are used by external subscribers only).
An example of configuration is here:
HQ-1(config)# ephone 1
HQ-1(config-ephone)# conference drop-mode creator
Добрый день, Дмитрий! А в CUCM, где софтовая конференция, при выходе инициатора, рассыпается? Я замечал, что при выходе всех участников - рассыпается. При необходимости, конференцию нужно инициировать заново.
ReplyDeleteДобрый день, Родион!
DeleteЗа это отвечает сервисный параметр для службы Cisco CallManager. Он называется Drop Ad Hoc Conference.
Скорее всего у вас установлено значение When No On-Net parties Remain in the Conference или When Conference Controller Leaves.